Page 1 of 1
Transmission and Drivetrain.
Posted: Tue 13 Oct 2015, 18:42
by ters
Post all tips/tutorials here.
Ters.
Re: Transmission and Drivetrain.
Posted: Wed 14 Oct 2015, 12:51
by Waterhond
Re: Transmission and Drivetrain.
Posted: Sun 27 Mar 2016, 13:48
by coyote
Re: Transmission and Drivetrain.
Posted: Sat 31 Mar 2018, 21:22
by Danie Baby Cresida
Hi All
To make things short and sweet, I built a corolla E70 facelift with a 3vzfe v6 connected to a w57 gearbox,Heads have been done mildly and gives 150kw
on the wheels,here is the question. when I shift from 2nd to 3rd under torque, It doesn't want to select, I have to literally take my foot off the throttle
for it to engage. the gearbox is brand new and it was fitted with a racing clutch. Any suggestions would be appreciated.
Re: Transmission and Drivetrain.
Posted: Sun 01 Apr 2018, 06:31
by ters
Danie Baby Cresida wrote: ↑Sat 31 Mar 2018, 21:22
Hi All
To make things short and sweet, I built a corolla E70 facelift with a 3vzfe v6 connected to a w57 gearbox,Heads have been done mildly and gives 150kw
on the wheels,here is the question. when I shift from 2nd to 3rd under torque, It doesn't want to select, I have to literally take my foot off the throttle
for it to engage. the gearbox is brand new and it was fitted with a racing clutch. Any suggestions would be appreciated.
How about an introduction,
https://www.africanmusclecars.com/forum ... m.php?f=41 show some pics of your ride in the thread? Please do give feedback in this section when the issue is resolved....for future reference?
Have you joined this forum too?
http://www.streetracing.co.za/forum/index.php
Ters.
Re: Transmission and Drivetrain.
Posted: Mon 12 Nov 2018, 19:35
by getafix
OK, I've bit the bullet and got a 289 Ford V8.
Now my question is which is the best gearbox to mate this engine to?
Target vehicle is an AC Cobra.
Re: Transmission and Drivetrain.
Posted: Mon 12 Nov 2018, 21:00
by jlebenon
Manual or auto ?
Re: Transmission and Drivetrain.
Posted: Wed 14 Nov 2018, 20:24
by getafix
Most likely auto 4spd - am too heavy on clutches to fit a manual