Hi All
I am new to this forum.
I own a Ford Fairlane ZF and need some parts on it. Let me know where I inquire about parts for it on this forum please.
Glad to have found this community.
Cheers
New member - 73 Ford Fairlane
Forum rules
Please the introduction first.
When posting topics on the forum please make sure:
Please the introduction first.
When posting topics on the forum please make sure:
- ● The posts are not political
- ● The posts are not about religion
- ● Please keep posts civil and don't be nasty to other members
New member - 73 Ford Fairlane
- Attachments
-
- 20151210_102422.jpg (3.18 MiB) Viewed 3483 times
-
- 20151208_161533.jpg (5.01 MiB) Viewed 3483 times
Re: New member - 73 Ford Fairlane
Welcome Riaan! Nice looking Fairlane, tell us more about her?
Post your parts wanted posts here: https://www.africanmusclecars.com/forum ... m.php?f=14
Ters.
Post your parts wanted posts here: https://www.africanmusclecars.com/forum ... m.php?f=14
Ters.
When it comes to the wife its easier to beg for forgiveness than ask for permission!
AMC Forum now accessible on Tapatalk! http://www.tsclassicclinic.co.za/
AMC Forum now accessible on Tapatalk! http://www.tsclassicclinic.co.za/
Re: New member - 73 Ford Fairlane
Thanks Ters
I changed it up a bit with a FE390 and C6 tranny. The motor has a stage 1 cam and has been brought to life with some upgrades.
Still want to do link suspension at the rear. Did Audi A4 discs and calipers at the rear. So the brakes are very good.
Battling with the cluster and might end up doing a custom solution. The fact that it's an Australian spec is a bit of a pain in the neck... Parts are very scarce and knowledge on the car as well. But so far so good. She is on the rod and running often.
I changed it up a bit with a FE390 and C6 tranny. The motor has a stage 1 cam and has been brought to life with some upgrades.
Still want to do link suspension at the rear. Did Audi A4 discs and calipers at the rear. So the brakes are very good.
Battling with the cluster and might end up doing a custom solution. The fact that it's an Australian spec is a bit of a pain in the neck... Parts are very scarce and knowledge on the car as well. But so far so good. She is on the rod and running often.
Social Media
Who is online
Users browsing this forum: No registered users and 10 guests