ATF leaking

All transmission related suppliers, gearboxes diffs etc.
Post Reply
User avatar
kavesh
Posts: 1499
Joined: Fri 20 Mar 2009, 13:35
Location: Pietermaritzburg

ATF leaking

Post by kavesh » Thu 03 Mar 2011, 21:32

Hi all

I am hoping to start my Elky this weekend...well that was the plan :oops:

I filled the engine with oil and then AFT into the Trimatic. After about 3.5 litres into the Trimatic I looked under the vehicle to see if there are any leaks and to my dismaym there was a steady drip of ATF.

From what I can establish it seems to be coming from the mechanism where the manual kickdown on the box is. See picture attached. Sorry its not a really good picture. Is there some type of seal that i'm not aware of?
It never leaked there before, but it was caked with dirt and grime which could have sealed a leak.

Any advice appreciated.

Thanks
K
Attachments
03032011084.jpg
03032011084.jpg (53.52 KiB) Viewed 5410 times

User avatar
alvin chetty
Posts: 902
Joined: Wed 19 Dec 2007, 14:59
Location: Cape Town

Re: ATF leaking

Post by alvin chetty » Thu 03 Mar 2011, 22:47

did you have the oil leak before filling the ATF or after. Maybe you filled too much
Google wont keep you out of Jail

User avatar
neresh
Posts: 933
Joined: Sat 21 Nov 2009, 07:42
Location: durban - south africa

Re: ATF leaking

Post by neresh » Fri 04 Mar 2011, 05:20

Hi - will let you know today - I have a stripped tri-matic , will have a look
'71 camino - 406 c.i - turbo 400(manual shift kit) - 9" rear (3.50:1)

User avatar
kavesh
Posts: 1499
Joined: Fri 20 Mar 2009, 13:35
Location: Pietermaritzburg

Re: ATF leaking

Post by kavesh » Fri 04 Mar 2011, 07:58

Alvin, i'm busy restoring my Elky. Just put the car back together. I'm sure the trimatic capacity is more than 3.5 litres.

Anyways over night almost a litre of AFT dripped out into a dish that I had placed to collect the fluid.

The dip stick last night showed that there was too much fluid, perhaps I was not meant to pour it all in at once, maybe a little at a time as the engine runs the box oil pump will suck the ATF in :cry:

Any help will really be appreciated.

User avatar
C-Body Barge
Posts: 645
Joined: Fri 21 Jan 2011, 14:21
Location: CPT

Re: ATF leaking

Post by C-Body Barge » Fri 04 Mar 2011, 08:48

I had a leak that developed where my kickdown lever is. I used a product made by Forte called Automatic Transmission Treatment. This has a seal conditioner that stopped the leak completely.

My Torquethrust 727 capacity is 8.7L The torque converter takes alot of this.
Hot rodders recycle, where's those prius' going when the greenies have a new fad.

User avatar
Johann65
Posts: 6288
Joined: Sun 24 Aug 2008, 13:07
Location: Rothdene, Gauteng

Re: ATF leaking

Post by Johann65 » Fri 04 Mar 2011, 14:57

Also Overfilled my box by about 5l what a mess!!! Happens when you do not know where the level is lying.

The Forte sound interesting. Will try it as soon as the drip has stopped.

Sterkte!!!
Member No: 209
Ah! Yes I remember it well! (Only GM's!)
1966 Opel Rekord L CLASSIC SEDAN Current Project

Post Reply

Social Media

     

Who is online

Users browsing this forum: No registered users and 2 guests