Hello there,
Can anyone please explain the Ford Motor Co. South Africa nameplate/tag in the engine bay at the front. I can hardly read any of the descriptions and codes.
New member 1972 Ranchero 302 V8
Re: New member 1972 Ranchero 302 V8
Welcome John!
Share some photos of the bakkie please?
Ters.
When it comes to the wife its easier to beg for forgiveness than ask for permission!
AMC Forum now accessible on Tapatalk! http://www.tsclassicclinic.co.za/
AMC Forum now accessible on Tapatalk! http://www.tsclassicclinic.co.za/
Re: New member 1972 Ranchero 302 V8
Some pics of the Ranchero
- Attachments
-
- Ranchero 8 Engine, top, front IMG_20230114_125354.jpg (359.75 KiB) Viewed 4730 times
-
- Ranchero 1 Rear IMG_20230114_125723.jpg (266.55 KiB) Viewed 4730 times
-
- Ranchero 15 side view IMG_20230114_125319_resized_20230114_063502382.jpg (708.71 KiB) Viewed 4730 times
Re: New member 1972 Ranchero 302 V8
Cleaned up Name plate shows MS = built 1972 November. Don't know what SIDO means, nor do I the HO colour code, axle 3 and a 1? Ranchero, auto 3 speed, 1973?
- IndianaJones
- Posts: 4866
- Joined: Sun 23 Aug 2009, 17:39
- Location: Citrusdal, RSA
Re: New member 1972 Ranchero 302 V8
I haven't seen the decode info for the Ranchero's.
It is so sad, I know somebody out there has the old parts fiches for these cars, and I wish they would share it with fellow enthusiasts.
But I'll shed a bit of light, based on known decode info of other SA-assembled Fords of the period.
1.) S&A (Source & Assembly)
M = Australia
S = South Africa
2.) Body (Body Type)
40 = Ranchero? not sure, probably
3.) Year and month of manufacture
N = 1973
M = March
4.) Serial (Serial Number)
41015
5.) Sido (Single Item Dealer Order)
340395 = This is the number of the order form to which the vehicle was built
Supposedly the first 3 numbers(340) would correspond to the specific dealer who ordered the vehicle
6.) Eng (Engine)
Q = Don't have this info, but it would state with what 6-Cylinder or V8 it was built.
7.) Tran (Transmission)
D = Don't have this info, but it would state with what gearbox and method of shifting(floor or column) it was built.
8.) R.Axle (Rear Axle)
3 = Don't have this info, but it would state the gear ratio of the diff
9.) Trim
1 = Don't have this info, but it would state the colour of the interior trim
10.) Paint
0 = digit “0” in this position, means it was painted in Monotone (as opposed to tutone)
H = Don't have this info, but it would state the colour of the bodywork, being a letter and not a number, also usually means it was a non-metallic paint. By 1977, H decodes to the colour "Avocado", but not sure if it will be correct for 1973.
The forum members with the most knowledge of decoding Aussie sourced Fords are "Boxy MS33" and "zahistorics"
The forum isn't as active as it used to be, but you could try PM'ing them.
It is so sad, I know somebody out there has the old parts fiches for these cars, and I wish they would share it with fellow enthusiasts.
But I'll shed a bit of light, based on known decode info of other SA-assembled Fords of the period.
1.) S&A (Source & Assembly)
M = Australia
S = South Africa
2.) Body (Body Type)
40 = Ranchero? not sure, probably
3.) Year and month of manufacture
N = 1973
M = March
4.) Serial (Serial Number)
41015
5.) Sido (Single Item Dealer Order)
340395 = This is the number of the order form to which the vehicle was built
Supposedly the first 3 numbers(340) would correspond to the specific dealer who ordered the vehicle
6.) Eng (Engine)
Q = Don't have this info, but it would state with what 6-Cylinder or V8 it was built.
7.) Tran (Transmission)
D = Don't have this info, but it would state with what gearbox and method of shifting(floor or column) it was built.
8.) R.Axle (Rear Axle)
3 = Don't have this info, but it would state the gear ratio of the diff
9.) Trim
1 = Don't have this info, but it would state the colour of the interior trim
10.) Paint
0 = digit “0” in this position, means it was painted in Monotone (as opposed to tutone)
H = Don't have this info, but it would state the colour of the bodywork, being a letter and not a number, also usually means it was a non-metallic paint. By 1977, H decodes to the colour "Avocado", but not sure if it will be correct for 1973.
The forum members with the most knowledge of decoding Aussie sourced Fords are "Boxy MS33" and "zahistorics"
The forum isn't as active as it used to be, but you could try PM'ing them.
Re: New member 1972 Ranchero 302 V8
Cleaned up Name plate shows MS = built 1972 November. Don't know what SIDO means, nor do I the HO colour code, axle 3 and a 1? Ranchero, auto 3 speed, 1973?
Helps me to understand what I have!
Much appreciated
Regards, John
Indiana Jones - thanks for the interesting information and suggestionsHelps me to understand what I have!
Much appreciated
Regards, John
Re: New member 1972 Ranchero 302 V8
Welcome to the forum!
Alfa GTV 3.0
Ford Capri Perana V8
Chevy Lumina Supercharged
Wait not for tomorrow to do what can be done today, live each day for one knows not what the next day may hold.
Ford Capri Perana V8
Chevy Lumina Supercharged
Wait not for tomorrow to do what can be done today, live each day for one knows not what the next day may hold.
Social Media
Who is online
Users browsing this forum: No registered users and 1 guest