U-Joint GMB-210-1200

Post here if you are looking for hard to find parts
Forum rules
If you are not a regular forum member, please introduce yourself in the Indroduce yourself/Welcome to new members section. Tell who you are, where you are from and some background details. Your advertisements will be deleted if you don't.
User avatar
Weasel
Posts: 146
Joined: Thu 26 Sep 2013, 19:26
Location: Centurion

U-Joint GMB-210-1200

Post by Weasel » Sat 11 Apr 2015, 19:56

Driveshaft decided to fall out today, the U-Joint is pretty worn. looked up and found the part im looking for is GMB-210-1200 and it doesn't seem to be available here. my guess is its imperial sizing?, so my dumb question is; is there some universal universal joint sizing whatnot that im not aware of, or is there supplier that will have this.

Thanks

User avatar
IndianaJones
Posts: 4862
Joined: Sun 23 Aug 2009, 17:39
Location: Citrusdal, RSA

Re: U-Joint GMB-210-1200

Post by IndianaJones » Sun 12 Apr 2015, 14:38

There is a supplier that will have this.

GMB is only one manufacturer of universal joints, other manufacturers might use a different part number.

For what vehicle is it, and does it have it's standard driveline?

User avatar
Weasel
Posts: 146
Joined: Thu 26 Sep 2013, 19:26
Location: Centurion

Re: U-Joint GMB-210-1200

Post by Weasel » Sun 12 Apr 2015, 16:23

Ok thanks, didnt know gmb was manufacturer, i thought it was part of the part no. Its for a d100 dodge 1959 and it is the srandard driveline.

User avatar
ters
Posts: 4202
Joined: Thu 19 Jan 2012, 19:39
Location: Pretoria

Re: U-Joint GMB-210-1200

Post by ters » Sun 12 Apr 2015, 18:28

Have you joined the Mopar owners group yet? ;) On Facebook: https://www.facebook.com/groups/moparownerssa/

Ters.
When it comes to the wife its easier to beg for forgiveness than ask for permission!
AMC Forum now accessible on Tapatalk! http://www.tsclassicclinic.co.za/

User avatar
IndianaJones
Posts: 4862
Joined: Sun 23 Aug 2009, 17:39
Location: Citrusdal, RSA

Re: U-Joint GMB-210-1200

Post by IndianaJones » Tue 14 Apr 2015, 11:43

Have you found GMB part nr 2101200?

If Autozone/Midas, etc doesn't have stock, even BMG/Bearing Man should be able to supply.

User avatar
Weasel
Posts: 146
Joined: Thu 26 Sep 2013, 19:26
Location: Centurion

Re: U-Joint GMB-210-1200

Post by Weasel » Sun 03 May 2015, 19:26

haven't found one yet but i haven't been looking :( been rather busy and it doesn't look like it will be a quick swap, it will have to be welded in somehow. Bakkie did however get a new carb and master cylinders :D

Doug Hirkham
Posts: 700
Joined: Fri 11 Jan 2008, 21:20
Location: Cape Town

Re: U-Joint GMB-210-1200

Post by Doug Hirkham » Wed 06 May 2015, 10:18

[quote=it doesn't look like it will be a quick swap, it will have to be welded in somehow. [/quote]

Better post some pics - sounds like you are barking up a very wrong tree.

User avatar
Weasel
Posts: 146
Joined: Thu 26 Sep 2013, 19:26
Location: Centurion

Re: U-Joint GMB-210-1200

Post by Weasel » Wed 06 May 2015, 15:24

Lol ok, here's what i mean, the front segment on the drive shaft is welded and i don't see how the joint will come loose without some cutting.

Image

Hubcap
Posts: 159
Joined: Mon 02 Jun 2008, 15:09
Location: Krugersdorp - Cradle of Humankind

Re: U-Joint GMB-210-1200

Post by Hubcap » Wed 06 May 2015, 15:39

Front segment is pressed fit. Probably internal clip.

User avatar
Johann72
Posts: 558
Joined: Fri 27 Feb 2015, 16:55
Location: Rothdene Gauteng

Re: U-Joint GMB-210-1200

Post by Johann72 » Wed 06 May 2015, 16:09

Pardon my ignorance!! Is that not a prop shaft! 8O 8O
Used to be known as Johann65.
1966 Opel Rekord Current running project
1972 Chev Kommando (V8 Conversion) Sold to Mantaray
1965 Chev Malibu Sold
1966 Volkswagen Sold
1953 Renault Break (Sold as scrap!)
1954 Hillman Californian Sold
1954 Triumph TR2 Sold

Post Reply

Social Media

     

Who is online

Users browsing this forum: No registered users and 4 guests